Get started

Indicators and strategies

Adaptive Market Profile – Auto Detect & Dynamic Activity ZonesAdaptive Market Profile is an advanced indicator that automatically detects and displays the most relevant trend channel and market profile for any asset and timeframe. Unlike standard regression channel tools, this script uses a fully adaptive approach to identify the optimal period, providing you with the channel that best fits the current market dynamics. The calculation is based on maximizing the statistical significance of the trend using Pearson’s R coefficient, ensuring that the most relevant trend is always selected. Within the selected channel, the indicator generates a dynamic market profile, breaking the price range into configurable zones and displaying the most active areas based on volume or the number of touches. This allows you to instantly identify high-activity price levels and potential support/resistance zones. The “most active lines” are plotted in real-time and always stay parallel to the channel, dynamically adapting to market structure. Key features: - Automatic detection of the optimal regression period: The script scans a wide range of lengths and selects the channel that statistically represents the strongest trend. - Dynamic market profile: Visualizes the distribution of volume or price touches inside the trend channel, with customizable section count. - Most active zones: Highlights the most traded or touched price levels as dynamic, parallel lines for precise support/resistance reading. - Manual override: Optionally, users can select their own channel period for full control. - Supports both linear and logarithmic charts: Simple toggle to match your chart scaling. Use cases: - Trend following and channel trading strategies. - Quick identification of dynamic support/resistance and liquidity zones. - Objective selection of the most statistically significant trend channel, without manual guesswork. - Suitable for all assets and timeframes (crypto, stocks, forex, futures). Originality: This script goes beyond basic regression channels by integrating dynamic profile analysis and fully adaptive period detection, offering a comprehensive tool for modern technical analysts. The combination of trend detection, market profile, and activity zone mapping is unique and not available in TradingView built-ins. Instructions: Add Adaptive Market Profile to your chart. By default, the script automatically detects the optimal channel period and displays the corresponding regression channel with dynamic profile and activity zones. If you prefer manual control, disable “Auto trend channel period” and set your preferred period. Adjust profile settings as needed for your asset and timeframe. For questions, suggestions, or further customization, contact Julien Eche (@Julien_Eche) directly on TradingView.
Pine Script® indicator
by Julien_Eche
10
Advanced Multi-Time B-Candle (ZLEMA + Volume + Trend)Key Improvements Multi-Timeframe Trend Confirmation Uses 15-min ZLEMA + 5-min ZLEMA → higher accuracy trend filter. ZLEMA for Faster Signals More responsive to price changes than standard EMA. Dual-Side Signals Detects both bullish and bearish reversal patterns. Breakout Filter Confirms breakout by checking close above/below previous candle’s high/low. Volume Surge Confirmation Requires volume spike (configurable multiplier & lookback).
Pine Script® indicator
by DevTrade309
RISK MANAGEMENT CALCULATOR V3📊 RISK MANAGEMENT CALCULATOR – Lot Size, Profit & R:R Tool This script is designed to help traders instantly calculate lot size, expected profit, and risk/reward ratio based on their trade plan. ✅ Features: Input your Risk Amount ($), Entry, Stop Loss, and up to 3 Take Profits Calculates: ✅ Lot Size based on risk ✅ Split profits per TP level (equally weighted) ✅ Total Profit & Risk/Reward (R:R) Displays everything in a clean bottom-right table Optimized for both: 🖥️ Desktop mode (larger layout) 📱 Mobile mode (toggle compact view) 💡 How to Use: Enter your planned Entry, Stop Loss, and Risk Amount Set any TP1, TP2, or TP3 prices (set TP to 0 if not used) The system will auto-compute your ideal lot size and show estimated profits 🔧 Parameters: Risk Amount ($) – how much you’re willing to lose Entry Price – your trade entry Stop Loss Price – your SL level Take Profit 1/2/3 – optional TP targets Pip Value – profit/loss per point for 1 standard lot 📱 Mobile Mode – compact the table for small screens 🔐 Notes: No trades are executed – this is a risk planning tool only Designed for all markets (forex, gold, indices, crypto) TP profits are equally split (e.g. 2 TP = 50% / 50%)
Pine Script® indicator
by danwang94
RISK MANAGEMENT CALCULATOR📊 RISK MANAGEMENT CALCULATOR – Lot Size, Profit & R:R Tool This script is designed to help traders instantly calculate lot size, expected profit, and risk/reward ratio based on their trade plan. ✅ Features: Input your Risk Amount ($), Entry, Stop Loss, and up to 3 Take Profits Calculates: ✅ Lot Size based on risk ✅ Split profits per TP level (equally weighted) ✅ Total Profit & Risk/Reward (R:R) Displays everything in a clean bottom-right table Optimized for both: 🖥️ Desktop mode (larger layout) 📱 Mobile mode (toggle compact view) 💡 How to Use: Enter your planned Entry, Stop Loss, and Risk Amount Set any TP1, TP2, or TP3 prices (set TP to 0 if not used) The system will auto-compute your ideal lot size and show estimated profits 🔧 Parameters: Risk Amount ($) – how much you’re willing to lose Entry Price – your trade entry Stop Loss Price – your SL level Take Profit 1/2/3 – optional TP targets Pip Value – profit/loss per point for 1 standard lot 📱 Mobile Mode – compact the table for small screens 🔐 Notes: No trades are executed – this is a risk planning tool only Designed for all markets (forex, gold, indices, crypto) TP profits are equally split (e.g. 2 TP = 50% / 50%)
Pine Script® indicator
by danwang94
Lorentzian Key Support and Resistance Level Detector [mishy]🧮 Lorentzian Key S/R Levels Detector Advanced Support & Resistance Detection Using Mathematical Clustering The Problem Traditional S/R indicators fail because they're either subjective (manual lines), rigid (fixed pivots), or break when price spikes occur. Most importantly, they don't tell you where prices actually spend time, just where they touched briefly. The Solution: Lorentzian Distance Clustering This indicator introduces a novel approach by using Lorentzian distance instead of traditional Euclidean distance for clustering. This is groundbreaking for financial data analysis. Data Points Clustering: 🔬 Why Euclidean Distance Fails in Trading Traditional K-means uses Euclidean distance: • Formula: distance = (price_A - price_B)² • Problem: Squaring amplifies differences exponentially • Real impact: One 5% price spike has 25x more influence than a 1% move • Result: Clusters get pulled toward outliers, missing real support/resistance zones Example scenario: Prices: ← flash spike Euclidean: Centroid gets dragged toward 150 Actual S/R zone: Around 100 (where prices actually trade) ⚡ Lorentzian Distance: The Game Changer Our approach uses Lorentzian distance: • Formula: distance = log(1 + (price_difference)² / σ²) • Breakthrough: Logarithmic compression keeps outliers in check • Real impact: Large moves still matter, but don't dominate • Result: Clusters focus on where prices actually spend time Same example with Lorentzian: Prices: ← flash spike Lorentzian: Centroid stays near 100 (real trading zone) Outlier (150): Acknowledged but not dominant 🧠 Adaptive Intelligence The σ parameter isn't fixed,it's calculated from market disturbance/entropy: • High volatility: σ increases, making algorithm more tolerant of large moves • Low volatility: σ decreases, making algorithm more sensitive to small changes • Self-calibrating: Adapts to any instrument or market condition automatically Why this matters: Traditional methods treat a 2% move the same whether it's in a calm or volatile market. Lorentzian adapts the sensitivity based on current market behavior. 🎯 Automatic K-Selection (Elbow Method) Instead of guessing how many S/R levels to draw, the indicator: • Tests 2-6 clusters and calculates WCSS (tightness measure) • Finds the "elbow" - where adding more clusters stops helping much • Uses sharpness calculation to pick the optimal number automatically Result: Perfect balance between detail and clarity. How It Works 1. Collect recent closing prices 2. Calculate entropy to adapt to current market volatility 3. Cluster prices using Lorentzian K-means algorithm 4. Auto-select optimal cluster count via statistical analysis 5. Draw levels at cluster centers with deviation bands 📊 Manual K-Selection Guide (Using WCSS & Sharpness Analysis) When you disable auto-selection, use both WCSS and Sharpness metrics from the analysis table to choose manually: What WCSS tells you: • Lower WCSS = tighter clusters = better S/R levels • Higher WCSS = scattered clusters = weaker levels What Sharpness tells you: • Higher positive values = optimal elbow point = best K choice • Lower/negative values = poor elbow definition = avoid this K • Measures the "sharpness" of the WCSS curve drop-off Decision strategy using both metrics: K=2: WCSS = 150.42 | Sharpness = - | Selected = K=3: WCSS = 89.15 | Sharpness = 22.04 | Selected = ✓ ← Best choice K=4: WCSS = 76.23 | Sharpness = 1.89 | Selected = K=5: WCSS = 73.91 | Sharpness = 1.43 | Selected = Quick decision rules: • Pick K with highest positive Sharpness (indicates optimal elbow) • Confirm with significant WCSS drop (30%+ reduction is good) • Avoid K values with negative or very low Sharpness (<1.0) • K=3 above shows: Big WCSS drop (41%) + High Sharpness (22.04) = Perfect choice Why this works: The algorithm finds the "elbow" where adding more clusters stops being useful. High Sharpness pinpoints this elbow mathematically, while WCSS confirms the clustering quality. Elbow Method Visualization: Traditional clustering problems: ❌ Price spikes distort results ❌ Fixed parameters don't adapt ❌ Manual tuning is subjective ❌ No way to validate choices Lorentzian solution: ☑️ Outlier-resistant distance metric ☑️ Entropy-based adaptation to volatility ☑️ Automatic optimal K selection ☑️ Statistical validation via WCSS & Sharpness Features Visual: • Color-coded levels (red=highest resistance, green=lowest support) • Optional deviation bands showing cluster spread • Strength scores on labels: Each cluster shows a reliability score. • Higher scores (0.8+) = very strong S/R levels with tight price clustering • Lower scores (0.6-0.7) = weaker levels, use with caution • Based on cluster tightness and data point density • Clean line extensions and labels Analytics: • WCSS analysis table showing why K was chosen • Cluster metrics and statistics • Real-time entropy monitoring Control: • Auto/manual K selection toggle • Customizable sample size (20-500 bars) • Show/hide bands and metrics tables The Result You get mathematically validated S/R levels that focus on where prices actually cluster, not where they randomly spiked. The algorithm adapts to market conditions and removes guesswork from level selection. Best for: Traders who want objective, data-driven S/R levels without manual chart analysis. Credits: This script is for educational purposes and is inspired by the work of @ThinkLogicAI and an amazing mentor @DskyzInvestments . It demonstrates how Lorentzian geometrical concepts can be applied not only in ML classification but also quite elegantly in clustering.
Pine Script® indicator
by mishy_Champ
6
Previous VWAP Levels by Riotwolftrading The "Previous VWAP" indicator calculates and displays the previous session's Volume Weighted Average Price (VWAP) for five timeframes (Daily, Weekly, Monthly, Quarterly, Yearly). Each VWAP is plotted as a horizontal line extending to the right edge of the chart, with customizable labels at the right to identify each level. The indicator is designed for traders who want to visualize key price levels from prior periods without cluttering the chart with current VWAPs or additional metrics like standard deviations. **Functionality**: - **Calculates Previous VWAPs**: Computes the VWAP for the previous session of each timeframe (Daily, Weekly, Monthly, Quarterly, Yearly) based on the input source (default: `hlc3`) and volume. - **Visual Style** : Uses `line.new` to draw horizontal lines from five bars back to the current bar, ensuring the lines extend to the right edge of the chart. Labels are placed at the right edge using `label.new` for clear identification. - **Customization** : Allows users to toggle visibility, adjust line styles, widths, colors, and label sizes, and choose between abbreviated or full label text. - **Minimalist Design**: Focuses solely on previous VWAPs, omitting current VWAPs, rolling VWAPs, and standard deviation bands to keep the chart clean. **Intended Use**: This indicator is useful for traders who rely on historical VWAP levels as support/resistance or reference points for trading decisions, particularly in strategies involving mean reversion or breakout trading. --- ### Rules and Features *VWAP Calculation**: - The VWAP is calculated as the cumulative sum of price (`src`) multiplied by volume (`sumSrcVol`) divided by the cumulative volume (`sumVol`) for each timeframe. - The "previous VWAP" is the VWAP value from the prior session, captured when a new session begins (e.g., new day, week, month, etc.). - The indicator uses the `hlc3` (average of high, low, close) as the default source, but users can modify this in the settings. **Timeframes**: - **Daily**: Previous day's VWAP. - **Weekly**: Previous week's VWAP. - **Monthly**: Previous month's VWAP. - **Quarterly**: Previous quarter's VWAP (3 months). - **Yearly**: Previous year's VWAP (12 months). - New sessions are detected using `ta.change(time(period))` for each timeframe. **Line Drawing**: - Lines are drawn using `line.new` from `time ` (five bars back) to the current bar (`time`), ensuring they extend to the right edge of the chart. - Lines are updated only on the last confirmed bar (`barstate.islast`) to optimize performance and avoid repainting. - Previous lines are deleted (`line.delete`) to prevent overlapping or clutter. **Labels**: - Labels are drawn at the right edge (`x=time`, `xloc=xloc.bar_time`) with `label.new`. - Users can choose between abbreviated labels (e.g., "pvD" for Previous Daily VWAP) or full labels (e.g., "Prev Daily VWAP"). - Label sizes are customizable (`tiny`, `small`, `normal`, `large`, `huge`). - Labels are deleted (`label.delete`) on each update to maintain a clean chart. 5. **Customization Options**: - **Visibility**: Toggle each VWAP (Daily, Weekly, Monthly, Quarterly, Yearly) on or off. - **Colors**: Individual color settings for each VWAP line and label (default colors: Daily=#E12D7B, Weekly=#F67B52, Monthly=#EDCD3B, Quarterly=#3BBC54, Yearly=#2665BD). - **Line Style**: Choose from `solid`, `dotted`, or `dashed` lines. - **Line Width**: Adjustable from 1 to 4 pixels. - **Label Settings**: Enable/disable labels, abbreviate text, and select label size. - **Source**: Customize the price source (default: `hlc3`). **Performance Optimization**: - The indicator only updates lines and labels on the last confirmed bar to minimize computational overhead. - Uses `var` to initialize variables and avoid unnecessary recalculations. - Deletes previous lines and labels to prevent chart clutter. --- ### Usage Instructions 1. **Add to Chart**: - In TradingView, go to the Pine Editor, paste the script, and click "Add to Chart." - The indicator will overlay on the price chart, showing previous VWAP lines and labels. 2. **Configure Settings**: - Open the indicator settings to customize: - Toggle visibility of each VWAP timeframe. - Adjust colors, line style, and width. - Enable/disable labels, choose abbreviation, and set label size. - Modify the source if needed (e.g., use `close` instead of `hlc3`). 3. **Interpretation**: - **Previous VWAPs**: Act as dynamic support/resistance levels based on the prior session's volume-weighted price. - **Timeframes**: Use shorter timeframes (Daily, Weekly) for intraday/swing trading, and longer timeframes (Monthly, Quarterly, Yearly) for positional trading. - **Labels**: Identify each VWAP level at the right edge of the chart for quick reference. 4. **Best Practices**: - Use on charts with sufficient volume data, as VWAP relies on volume (a warning is triggered if no volume data is available). - Combine with other indicators (e.g., moving averages, RSI) for confirmation in trading strategies. - Adjust line styles and colors to avoid visual overlap with other chart elements. --- ### Example Use Case A trader using a 1-hour chart can add the "Previous VWAP" indicator to identify key levels from the prior day, week, or month. For example: - The Previous Daily VWAP might act as a support level for a bullish trend. - The Previous Weekly VWAP could serve as a target for a swing trade. - Labels at the right edge make it easy to identify these levels without cluttering the chart. This indicator provides a clean, customizable way to visualize previous VWAPs, making it ideal for traders who want historical price context with minimal chart noise. For the complete Pine Script code, refer to the artifact provided in the previous response.
Pine Script® indicator
by anarkiacapital
TZtraderTZtrader This is a TrendZones version with features to set stoploss and targets in short and long positions meant for use in intraday charts. It aims to provide signals for opening and closing long and short positions. In the comments under the TrendZones publication several people expressed a need for features for a short position similar to those for a long position as implemented in TrendZones, some want to use it for scalping, some asked for alerts. When I proposed to create a version for day trading with target lines based on ATR, several people liked the idea. Full disclosure: I don’t do day trading, because, after I lost a lot of money, I had to promise my wife to stay away from it. I restrict myself to long term investing in stocks which are in uptrend. However I understand what a day trader needs. I gather from my experience that day trading or scalping is an attempt to earn something by opening a position in the morning and close, reopen and close it again during the day with a profit. It is usually done with leveraged instruments like CFD’s, futures, options, and what have you. Opening and closing positions is done within minutes, so the trader needs a quick and efficient way to set proper stoploss and target. TZtrader supports this by showing only three or four numbers on the price bar: The price of the instrument, The logical stop level (gray or green or maroon dots), and the target level (navy). All other numbers are suppressed to prevent mistakes. Also a clear feedback for current settings at the top-center of the pane and an alert feedback at bottom that flashes alerts during the development of the current bar and gives suppression status. The script First I made a bare bones version of TrendZones to which I added code for long and short trading setups and a bare setup for no position. The code for the logical stops in long setup had to be reviewed, after which this became the basis for stops in short setup. Then I added code for 10 alert messages, which was a hassle, because this is the first time I coded alerts and the first time I used an array as a stack to avoid a complicated if-then construction. During testing the array caused a runtime error which I solved by adding ‘array.clear’ to the code, also I discovered that in TradingView separate alerts have to be created for all three setups - short, long and bare. Flipping setups is done in the inputs with a dropdown menu because Pine Script has no function for a clickable button. One visual with three setups. The visual has the TrendZones structure: Three near parallel very smooth curves, which border the moderate uptrend (green) and downtrend (orange) zone over and under the curve in the middle, the COG (Center Of Gravity). Where the price breaks out of these curves, strong trend zones show up over and under the curves, respectively strong uptrend (blue) and strong downtrend (red). Three setups were made clearly different to avoid confusion and to provide oversight in case of multiple trades going on simultaneously which I imagine are monitored in one screen. You have to see which one is long, which short and which have no position. The long setup should not trigger short signals, nor should the short trigger long signals nor the bare setup exclusive long or short signals. The Long setup is default, shown on the example chart. In this setup the Stoploss suggestions (green, gray and maroon dots) are under the price bars and the target line (navy) at a set distance above the High Border. A zone with a width of 1 ATR is drawn under the Low Border. In this setup 5 specific alerts are provided The Short setup has the Stoploss suggestions over the price bars, the target line at a set distance under the Low Border. A zone with a width of 1 ATR is drawn above the High Border. This setup also has 5 specific alerts. The Bare setup has no Stoploss suggestions, no target line and supports 4 alerts, 2 in common with the Long setup and 2 with Short. The table below gives a summary of scripted alerts: Setup = Where = When = Purpose Long, Bare = Green Zone = Bars come from lower zones = Uptrend starts Long, Bare = Green Zone = Sideways ends in uptrend = Uptrend resumes Long = COG = First crossing = Uptrend might end warning Long = Orange Zone = Bars come from higher zones = Uptrend ended take care Long = Red Zone = Bars come from higher zones = Strong downtrend->close Long Short, Bare = Orange Zone = Bars come from higher zones = Downtrend starts Short, Bare = Orange Zone = Sideways ends in downtrend = Downtrend resumes Short = COG = First crossing = Downtrend might end warning Short = Green Zone = Bars come from lower zones = Downtrend ended take care Short = Blue Zone = Bars come from lower zones = Strong uptrend -> close short You can use script alerts in TradingView by clicking the clock in the sidebar, then ‘create alert’ or plus, as condition you choose ‘Tztrader’ in the dialog box, then the “Any alert() function call” option (the first item in the list). The script lets the valid alert trigger by TradingView after the bar is completed, this can differ from the flashed messages during its formation. When you create alerts in Tradingview, I advice to do that for each setup, then to make only the alert active which matches the current setup, pause the other ones. Suppressing false and annoying signals The script has two ways to suppress such signals, which have to do with the numbers in the alert feedback. The numbers left and right of the message with a colored background, depict the zones in which the previous (left) and current (right) bar move. 1 is the strong downtrend zone (red), 2 the moderate downtrend zone (orange), 3 the sideways zones (gray), 4 the COG (gray), 5 the moderate uptrend zone (green), 6 the strong uptrend zone (blue), 7 something went wrong with assigning a zone (black). In extensive testing the number 7 never occurs, because I catch that error in the code. The idea is that an alert is only triggered if the previous bar was in a different zone. When the bars are in the same zone, no alert is possible. This way all annoying signals are suppressed and long, short and bare get the appropriate alerts. The third number is a counter. It counts how often the COG is crossed without touching the outer curves. The counter will reset to zero when the upper or lower curve is touched. When the count is 1 you have zone situation 4 and appropriate alerts are flashed. When the count is 2 or higher, a sideways situation (3) is called and while the recrossings are going on, no alerts can be flashed. This suppresses false signals. The ATR zone and curves are brownish-gray where sideways happens(ed). When the channel is narrowed down to just the three curves, some false signals still might occur. Inputs “Setup”, default is long, drop down menu provides long, short and bare. “Target ATR”, default is 2, sets the amount of ATR for the target line. In 1 minute charts 4 seems an appropriate setting, you have to learn by experience which setting works. “show feedback …” default is on, This creates two feedback labels, a Setup feedback on top of the pane, which shows charted instrument, Setup type, Trend and timeframe of the chart. Background color of Trend feedback is green when it matches the setup, red when mismatches and gray when no match. The alert feedback at the bottom of the pane shows a number, a message and two numbers. The numbers will be explained in the chapter about false and annoying signals below. During formation of the bar, valid alerts are flashed with a blue background, otherwise the message ‘alerts for current bar suppressed’. Logical Stops The curves are the logical place to put stops, because, as these are averages of the high and low border of a Donchian channel, they signify the ‘natural’ current highest, lowest and main level in the lookback period that fit the monitored trend setup. A downtrend turns into an uptrend when a breakout of the upper curve occurs. If you are short, that is where you want to close position, so the logical place for the stoploss is the upper curve. Vice versa, when you are long, the logical stop is on the lower curve. The stops show up as green or gray dots on the curves, the green dots signify a nice entry level, the gray stops are there to suggest levels where unrealized profits might be secured, the maroon dots indicate that the trend mismatches the setup. COG versus other lines Any line used to identify a trend, be it some MA or some other line, is interpreted the same way: When the bars move above the line there is an uptrend and when below, a downtrend. COG is not different in that sense. If you put such a line in the same chart as TZtrader, you can see situations in which the other line shows uptrend or downtrend earlier than COG, also some other lines, e.g. Hull MA, are very good at showing tops and bottoms, while COG ignores these. On the other hand the other lines are usually a little nervous and let you shake out of position too soon. Just like the other lines, COG gives false signals when it is near horizontal. The advantage of the placement COG is the tolerance for pull backs. This way TZtrader keeps you longer in the trend. Such pull backs are often ‘flags’ which are interpreted in TA as confirming the trend. Tztrader aims to get you in position reasonably soon when a trend begins and out of position as soon as the trend turns against you. The placement of COG is done with a fundamentally different algorithm than other lines as it is not an average of prices, but the middle of two averages of borders of a Donchian channel. This gives the two zones between the curves the same quality as the two zones above and below the middle line of a standard Donchian Channel. A multi timeframe application. In this scenario you put a 5 minutes and 1 minute chart with Tztrader side by side. If the 5 minutes shows uptrend, set the 1 minute on long trading and open positions when the trend matches uptrend en close when it mismatches. Don’t open short positions. Once the 5 minute changes to downtrend, set Tztrader in the 1 minute to short trading and open positions when the trend matches downtrend and close when it mismatches. The idea is that in a long ‘context’, provided by the 5 minutes, the uptrends in the 1 minute will last longer and go further, vice versa for the short ‘context’. This way you do swing trading in the 5 minute in a smart way, maximizing profits. You can do this with any timeframe pairs with a proportion of around 5:1, 4:1, 6:1, like e.g. 60 minutes and 15 minutes or weeks and days (5 trading days in a week). Dear day-traders, may this tool be helpful and may your days be blessed. Take care
Pine Script® indicator
by eykpunter
2
Simple Trend Indicator (Heikin-Ashi) | Lyro RSSimple Trend Indicator (Heikin-Ashi) A momentum oscillator using Heikin-Ashi smoothed data to filter trend direction with zero-line crosses. This indicator calculates the normalized deviation of Heikin-Ashi OHLC values from their Simple Moving Average (SMA), then averages these deviations into a single oscillator. It simplifies trend detection by: Reducing noise via Heikin-Ashi smoothing. Highlighting momentum shifts through a zero-line cross system (bullish/bearish). Providing clear visual signals with color-coded plots and directional dots. Originality: Unlike standard momentum oscillators, this tool uniquely combines: Heikin-Ashi normalization for cleaner trend analysis. Multi-component averaging (high, open, low, close) to balance sensitivity. Minimalist design for clutter-free charting. How It Works: Data Input: Fetches Heikin-Ashi OHLC values using request.security(). Momentum Calculation: For each Heikin-Ashi component: Computes % deviation from its SMA: (value − SMA(value, length)) / SMA(value, length) * 100. Oscillator: Averages deviations of all four components into one line (sum). Signals: Bullish: Oscillator > 0 (green). Bearish: Oscillator < 0 (red). Cross Confirmation: Dots (⦿) mark zero-line crosses. Usage: Trend Following: Enter long/short on sustained oscillator breaks above/below zero. Reversal Watch: Zero-line crosses may hint at weakening momentum. Filter: Combine with volume or support/resistance levels. ⚠️Disclaimer: This indicator is a tool for technical analysis and does not provide guaranteed results. It should be used in conjunction with other analysis methods and proper risk management practices. The creators of this indicator are not responsible for any financial decisions made based on its signals.
Pine Script® indicator
by LyroRS
Footprint-Style Order Flow by Kalibea📊 Indicator: "Footprint-Style Order Flow by Kalibea" Simplified Order Flow Analysis for TradingView This indicator was created by Kalibea to bring you the power of Order Flow analysis in a clear, practical way—without technical complexity and fully compatible with TradingView. While TradingView doesn’t support traditional footprint charts, this tool simulates institutional market reading using a smart calculation of estimated volume delta, helping you make more informed trading decisions. 🔍 What does this indicator do? Estimated Delta: Calculates the difference between buying and selling pressure per candle, based on price movement and volume. Smart Visual Signals: 🔼 Green Triangle: Potential buy entry (buyer dominance). 🔽 Red Triangle: Potential sell entry (seller dominance). Delta Histogram: Displays whether each candle was driven more by buyers or sellers. Live Labels: Shows real-time delta values above each candle for quick interpretation. 🧠 How does it help your trading? Detects real-time market imbalances (who's in control: buyers or sellers). Improves entry and exit timing, especially on lower timeframes. Helps you confirm other strategies such as supply/demand zones, support/resistance, or candlestick patterns. Provides an institutional-style reading simplified for use within TradingView. ⚙️ Fully Customizable to Your Style Adjust the delta sensitivity to suit any market: Forex, Crypto, Indices, and more. Turn on/off visual signals and histogram as needed. 🔑 Recommended by Kalibea for: ✅ Intraday traders and scalpers ✅ Traders looking to take the next step into institutional-style analysis ✅ Those seeking precise entries without overcomplicating their charts 💬 “Order Flow is the market’s internal voice. This indicator helps you hear it—no expensive footprint software required.” — Kalibea
Pine Script® indicator
by kalibea
CGPT Golden Cross / Death Cross AlertThis custom indicator identifies Golden Cross (Gx) and Death Cross (Dx) events using either EMA or SMA moving averages. A Golden Cross occurs when a short-term MA (e.g., 50) crosses above a long-term MA (e.g., 200), signaling potential bullish momentum. A Death Cross signals potential bearish momentum, with the short-term MA crossing below the long-term MA. It includes: 📈 Customizable MA types (EMA or SMA) ⚙️ Adjustable fast & slow MA lengths 🟢🔴 Chart labels for Gx (green) and Dx (red) 🎯 Background highlights for visual trend shifts 🔔 Built-in alert conditions for real-time notifications Ideal for crypto, stocks, or forex swing and trend trading
Pine Script® indicator
by Shazch24
Mara JPY Bias ProMara JPY Bias Pro™ is a precision tool built for serious traders who focus on JPY and USD pairs. This synthetic index combines USDJPY + EURJPY + GBPJPY, generating a smooth and dynamic representation of JPY strength or weakness. When the line turns green, JPY is weakening — time to look for LONG setups on XXX/JPY pairs. When red, JPY is strengthening — ideal moment for SHORT trades. Built-in bias logic with adjustable MA-based trend detection or slope/momentum view lets you customize signals based on your strategy. Plus, we’ve included a normalized DXY overlay, so you can track USD strength in parallel — perfect for traders working with EUR/USD, GBP/USD, USD/JPY and JPY crosses. 💡 Designed for day traders, scalpers, and smart money traders looking for clean confluence. ✅ Features: Visual color-coded JPY bias (Green = Long / Red = Short) Optional USD (DXY) strength overlay Customizable MA length and bias logic Built-in alerts for bias shifts & momentum flips 🔔 Alert-ready – never miss a reversal. Trade smarter. Cut the noise. Stay on the right side of the move.
Pine Script® indicator
by Mara855
XRP Scalping with EMA Crossover Anticipation This script is designed to detect scalping opportunities on XRP by anticipating EMA crossovers, reinforced with technical confirmation filters. Methodology - The core signal is based on the crossover between a fast EMA (9) and a slow EMA (21). - RSI (14) conditions are applied to avoid weak setups: RSI must be above 40 for buy signals and below 70 for sell signals. - Before any crossover is validated, the script requires at least two consecutive “pre-crossover” signals. These indicate favorable momentum and convergence conditions before the crossover occurs. - Final signals are only displayed if this minimum number of preconditions is met. Application This system is optimized for scalping on the 1-minute to 5-minute timeframes but can be adapted for longer-term setups by adjusting parameters. The anticipation logic helps reduce lagging entries and improves signal selectivity during volatile conditions. Both pre-crossover and confirmed crossover conditions include alert options. The code is fully editable and customizable.
Pine Script® indicator
by gnatius1975
Triple MA Buy & Sell SignalsTriple MA Buy & Sell Signals Indicator This indicator is designed to help traders identify high-probability entry points based on the combination of three moving averages (8, 50, and 200) while filtering signals in the direction of the main trend. How It Works Trend Filter (200 MA) If the price is above the 200 MA, only BUY signals are displayed. If the price is below the 200 MA, only SELL signals are displayed. 8 MA and 50 MA Cross (Regular Signals) BUY (Green): When the 8 MA crosses above the 50 MA, and the price is above the 200 MA. SELL (Red): When the 8 MA crosses below the 50 MA, and the price is below the 200 MA. 8 MA and 200 MA Cross (Major Trend Signals) BUY (Yellow): When the 8 MA crosses above the 200 MA. SELL (Yellow): When the 8 MA crosses below the 200 MA. Purpose This indicator is particularly useful for traders who follow Smart Money Concepts (SMC) or ICT-based strategies, as it helps: Identify trend direction with the 200 MA. Spot short-term trade entries using the 8/50 MA cross. Highlight major trend reversals using the 8/200 MA cross.
Pine Script® indicator
by hrak22
BTC 1m Chop Top/Bottom Reversal (Stable Entries)Strategy Description: BTC 5m Chop Top/Bottom Reversal (Stable Entries) This strategy is engineered to capture precise reversal points during Bitcoin’s choppy or sideways price action on the 5-minute timeframe. It identifies short-term tops and bottoms using a confluence of volatility bands, momentum indicators, and price structure, optimized for high-probability scalping and intraday reversals. Core Logic: Volatility Filter: Uses an EMA with ATR bands to define overextended price zones. Momentum Divergence: Confirms reversals using RSI and MACD histogram shifts. Price Action Filter: Requires candle confirmation in the direction of the trade. Locked Signal Logic: Prevents repaints and disappearing trades by confirming signals only once per bar. Trade Parameters: Short Entry: Above upper band + overbought RSI + weakening MACD + bearish candle Long Entry: Below lower band + oversold RSI + strengthening MACD + bullish candle Take Profit: ±0.75% Stop Loss: ±0.4% This setup is tuned for traders using tight risk control and leverage, where execution precision and minimal drawdown tolerance are critical.
Pine Script® strategy
by Schedule1Cannabis
1